The powerful injection mortar for rebar connections and cracked concrete.

Epoxy mortar FIS EM Plus

The fischer injection mortar FIS EM Plus is a high-quality epoxy mortar for top load-bearing capacity in cracked and non-cracked concrete and for seismic applications in performance categories C1 and C2. It is suitable for fixations of shear connectors for concrete layers, tall shelvings, and heavy steel constructions both inside and outside. The injection mortar is processed with the approved system components fischer threaded rod FIS A with variable anchorage depths and fischer internal threaded anchor RG M I as well as with reinforcement bars. The epoxy mortar is ideally suited for rebar connections that are installed with a large drill hole diameter and a high anchorage depth. It can also be used for diamond-drilled and water-filled drill holes, as well as for applications under fatigue cyclic loading. The approval of the injection mortar for use in glued laminated or glued solid timber of spruce (Picea abies), fir (Abies alba) or pine (Pinus sylvestris) allows the realisation of high-performance and appealing wood-wood, wood-concrete and wood-steel connections.

Product variants

Download of image data

Product variants

Approvals / Test reports

3 Product variant (s)

Language on label

Contents

Packaging

Amount

GTIN (EAN-Code)

Legend = Permission Available— = Permission not Available

Viewed 3 of 3 variant (s)

Advantages

The ETA assessment guarantees a service life of 100 years. The expert report of IEA Stuttgart even confirms a working life up to 120 years and thus underlines the reliability and durability of the FIS EM Plus.
The optimised formulation of the epoxy resin mortar FIS EM Plus leads to improved load values in cracked and non-cracked concrete.
The mortar can be used for rebar connections from diameter 8 to 40, including seismic applications.
With the threaded rod FIS A, the loads to be applied can be designed variably by selecting the anchorage depth. The mortar is approved for diamond drilled and water-filled drillholes as well as seismic applications and thus offers safety under extreme conditions.
For practical use on the building site, FIS EM Plus can be processed at low temperatures down to -5°C.
The approval of the injection mortar for use in glued laminated or glued solid timber of spruce (Picea abies), fir (Abies alba) or pine (Pinus sylvestris) allows the realisation of high-performance and appealing wood-wood, wood-concrete and wood-steel connections.
The standard threaded rod FIS A can be set for light dynamic loads with the epoxy injection system FIS EM Plus in the sizes M12 and M16 in steel grade 8.8 or in the sizes M12, M16, M20 and M24 in stainless steel R and the fischer filling set.

Applications

Post-installed rebar connections
Jointers for concrete layers
Rim beam anchorings
Seismic applications
Anchorings in diamond-drilled or in waterfilled drill holes
Heavy steel constructions
Silo installations
Tall shelving
Sound barriers
Temporary or removable fixings (with internal threaded anchor RG M I)
Anchorings in sealing surfaces according to WRL (Water Ressources Law)
Anchorings in wood

Building materials

Approved for anchorings in:

Concrete C20/25 to C50/60, cracked and non-cracked
Sealing surfaces according WRL (Water Ressouces Law)
Glued laminated or glued solid timber of spruce (Picea abies), fir (Abies alba) or pine (Pinus sylvestris)

Suitable for:

Natural stone with dense structure

You can find detailed information on building materials in the registration document.

Approvals

ETA-23/0842
ETA-19/0657
ETA-22/0001
ETA-17/1056
ETA-17/0979
DoP No. 0341
DoP No. 0351
DoP No. 0367
ESR-1990
Z-74.8-199
Z-74.8-211
Z-9.1-914
Report No MRF 19 26082687/C
EPD-DBC-FIW-20230530-CBA1-EN

Functionality

The epoxy mortar FIS EM Plus combined with the FIS A anchor rod, is suitable for pre-positioned and push-through installation and with the internal threaded anchor RG M I for pre-positioned installation.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
The mortar is injected bubble-free from the drill hole base.
The mortar bonds the entire surface of the anchor with the drill hole wall and seals off the drill hole.
The anchor is set manually by lightly rotating it until it reaches the drill hole base.
During push-through installation, the annular gap between the anchor rod and attachment is filled with FIS EM Plus.

Mounting Strip 1 Picture

1 / 9

Mounting Strip 2 Picture

1 / 9

Mounting Strip 3 Picture

1 / 5

Mounting Strip 4 Picture

1 / 15

Mounting Strip 5 Picture

1 / 13

1 / 12

ETA Certification Document

pdf, ETA-23/0842

European Technical Assessment for fischer FIS EM Plus dynamic - Post-installed fasteners in concrete under fatigue cyclic loading

Created on 06/11/2024

ETA Certification Document

pdf, ETA-19/0657

European Technical Assessment for fischer injection system FIS EM Plus - Glued-in rods for timber connections

Created on 09/13/2024

ETA Certification Document

pdf, ETA-22/0001

European Technical Assessment for fischer injection system FIS EM Plus - Post-installed reinforcing bar (rebar) connections with improved bond-splitting behaviour

Created on 10/30/2024

DOP - Declaration of Performance

pdf, DoP No. 0341

Declaration of Performance for fischer injection system FIS EM Plus (Mortar for post-installed rebar connections)

Created on 08/07/2023

ETA Certification Document

pdf, ETA-17/1056

European Technical Assessment for Rebar connection with fischer injection system FIS EM Plus - Systems for post-installed rebar connections with mortar

Created on 11/01/2024

DOP - Declaration of Performance

pdf, DoP No. 0367

Declaration of Performance for fischer injection system FIS EM Plus (Mortar for post-installed rebar connections)

Created on 11/19/2024

ETA Certification Document

pdf, ETA-17/0979

European Technical Assessment for fischer injection system FIS EM PLUS - Bonded fasteners and bonded expansion fasteners for use in concrete (Alternative drilling methods, seismic and fire in steel fibre reinforced concrete, variable working life, time-to-failure assesment)

Created on 02/10/2025

DOP - Declaration of Performance

pdf, DoP No. 0351

Declaration of Performance for fischer injection system FIS EM PLUS (Bonded fastener for use in concrete)

Created on 05/06/2024

Certificate

pdf,

Test Report Service Life 120 years

Valid from 07/16/2024
to 07/16/2029

ICC Certification

pdf, ESR-1990

ICC-ES Evaluation Report

Valid from 09/01/2023
to 09/30/2025

DIBt, National German Certification

pdf, Z-74.8-199

General construction technique permit - fischer injection system FIS EM Plus for use in uncoated liquid-tight sealing systems made of concrete (FD / FDE concrete) in SFH facilities

Valid from 10/29/2020
to 10/29/2025

DIBt, National German Certification

pdf, Z-74.8-211

General construction technique permit - fischer injection system FIS EM Plus for use in coated concrete surfaces in SFH facilities

Valid from 08/30/2022
to 08/30/2027

DIBt, National German Certification

pdf, Z-9.1-914

National technical approval - fischer FIS EM Plus injection system for steel rods to be glued into timber members

Valid from 02/19/2024
to 02/19/2029

Test report (fire protection)

pdf, Report No MRF 19 26082687/C

fischer FIS EM Plus Injection system

Created on 11/14/2019

EPD - Environmental Product Declaration

pdf, EPD-DBC-FIW-20230530-CBA1-EN

Environmental Product Declaration for fischer Injection Mortar FIS EM Plus

Valid from 04/18/2024
to 04/17/2029

Safety Data Sheet

pdf,

Safety data sheet for 544155 FIS EM Plus 390 S

Safety Data Sheet

pdf,

Safety data sheet for 544172 FIS EM Plus 390 S in bucket

Safety Data Sheet

pdf,

Safety data sheet for 544156 FIS EM Plus 390 S HWK big

Load Table

pdf,

Injection system FIS EM Plus with threaded rod FIS A resp. RG M

Load Table

pdf,

Injection system FIS EM Plus with internal threaded anchor RG M I - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Load Table

pdf,

Loads FIS EM Plus with FIS A under tensile stress

Load Table

pdf,

Injection system FIS EM plus dynamic with threaded rod FIS A resp. RG M

Technical Data Sheet

pdf,

Injection Mortar FIS EM Plus

Installation Instructions

pdf,

FIS EM Plus

Curing Times

pdf,

Curing times for injection mortar FIS EM Plus

Marketing Documents

pdf,

FIS EM Plus. The injection mortar for strong bonds.

Marketing Documents

pdf,

WRL compliant anchorings. Officially approved.

Marketing Documents

pdf,

Post-installed rebar connections. Safely connected.

System components

DIBt-approval
ETA-approval
Language on label	AR, EN, ZH
Contents	1 x Cartridge 390 ml 2 x Static mixer FIS MR Plus
Packaging	Cartridge
Amount	1 pcs.
GTIN (EAN-Code)	4048962312065

DIBt-approval
ETA-approval
Language on label	AR, EN, ZH
Contents	20 x Cartridge 390 ml 20 x Static mixer FIS MR Plus
Packaging	Bucket
Amount	20 pcs.
GTIN (EAN-Code)	4048962312232

DIBt-approval
ETA-approval
Language on label	EN, FR, KO
Contents	20 x Cartridge 390 ml 20 x Static mixer FIS MR Plus
Packaging	Plastic box
Amount	20 pcs.
GTIN (EAN-Code)	4048962312072

Epoxy mortar FIS EM Plus

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download