The easy-to-install heavy-duty anchor with internal thread for low edge clearances.

Heavy-duty anchor SL M/SLM-N

The fischer heavy-duty anchor SL M is a sleeve anchor with an internal thread made from zinc-plated steel. The fischer heavy-duty anchor SL M is ideal for cost-effective anchorings of machines or cantilevers inside. The fischer heavy-duty anchor SL M-N is an internal threaded anchor made from zinc-plated and stainless steel with an M8 and M10 internal thread diameter. The SL M and SL M-N are suitable for pre-positioned and stand-off installation. When the screw is tightened, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. The metric internal thread allows for the use of conventional screws or threaded rods. This increases flexibility and reduces costs.
Product variantsDownload of image data

Product variants

Filter
Filter
5 Product variant (s)
Drill diameter
Packaging
Amount
GTIN (EAN-Code)
Viewed 5 of 5 variant (s)

The advantages / Product description

Advantages
  • The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation.
  • The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible.
  • The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
  • The red plastic cap protects against soiling and thus ensures free-running of the thread.

Application and approval

Applications
  • Steel constructions
  • Handrails
  • Consoles
  • Ladders
  • Cable trays
  • Machines
  • Staircases
  • Gates
  • Façades
  • Stand-off installations
Building materials
  • Concrete C20/25 to C50/60, non-cracked
  • Concrete C12/15
  • Natural stone with dense structure
You can find detailed information on building materials in the registration document.

Assembly instruction

Functionality
  • The SL M is suitable for pre-positioned installation.
  • When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall.
  • For correct installation, it must be ensured that the pre-positioned anchor SL M can be supported on the attachment, or that the threaded rod is countered.
Mounting Strip 1 Picture
1 / 6

Documents for download

Heavy-duty anchor SL M zinc plated steel / stainless steel - Recommended loads of a single anchor in non-cracked normal concrete (concrete compression zone) of strength class C20/25.
cd-blue-c6785f99-pww5z