• Products
  • Service
  • Expertise
  • fischer group
Hammerset anchor EA II
  • Product Category Picture: "Hammerset anchor EA N-D / EA II-D"
  • Application Picture
    • Product Category Picture
    • Application Picture
      The hammerset anchor for the anchoring of diamond saws and drills.

      Hammerset anchor EA N-D / EA II-D

      The fischer hammerset anchor EA II M 12 D is an internal threaded anchor made from zinc-plated steel. It is ideally suited to the anchoring of diamond drills and saws. The anchor sleeve is reinforced so that it can bear the necessary loads. The hammerset anchor is mounted with the hammer flush to the base material. With the setting tool EHS Plus, the sleeve is expanded and braced against the drill hole wall through the driving in of the internal pin. No torque should be applied to the screw to enable correct expansion.
      Product variants
      Download of image data

      Product variants

      Filter
      Filter
      Approvals / Test reports
      2 Product variant (s)
      Drill diameter
      Min. bolt penetration
      Max. bolt penetration
      Packaging
      Amount
      GTIN (EAN-Code)
      Legend = Permission Available— = Permission not Available
      Viewed 2 of 2 variant (s)

      The advantages / Product description

      Advantages
      • The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation.
      • The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
      • The EMS machine setting tool allows for effortless installation, particularly in the case of series installations.
      • The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety.
      • Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded.
      • The black fixing point prevents the anchor from falling out of the drill hole during overhead installation.

      Application and approval

      Applications
      • Pipelines and ventilation ducts
      • Sprinkler systems
      • Cable conduits and wires
      • Gratings
      • Steel constructions
      • Machines
      • Consoles
      • Shuttering props
      • Diamond and core drilling devices
      Building materials
      Approved for:
      • Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
      • Concrete C20/25 to C50/60, non-cracked
      Also suitable for:
      • Concrete C12/15
      • Natural stone with dense structure
      You can find detailed information on building materials in the registration document.
      Approvals
      • ETA-07/0135
      • ETA-07/0142
      • DoP No. 0756-CPD-0332
      • DoP No. 0292

      Assembly instruction

      Functionality
      • The EA II is suitable for pre-positioned installation.
      • Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer.
      • The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall.
      • The setting tools must sit on the rim of the anchor to ensure correct expansion.
      • Use the special EA II M12 x 50 D / EA M 12 x 50 N D with thicker sleeve for fixing diamond and core drilling devices.
      Mounting Strip 1 Picture
      1 / 7
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture
      • 5
        Mounting Strip 1 Picture
      • 6
        Mounting Strip 1 Picture
      • 7
        Mounting Strip 1 Picture

      Documents for download

      ETA Certification Document
      pdf, ETA-07/0135
      European Technical Assessment for fischer drop-in anchor EA II - Mechanical fasteners for use in concrete
      Created on 10/20/2021
      ETA Certification Document
      pdf, ETA-07/0142
      European Technical Assessment for fischer drop-in anchor EA II - Fasterners for use in concrete for redundant non-structural systems
      Created on 09/24/2021
      DOP - Declaration of Performance
      pdf, DoP No. 0292
      Declaration of Performance for fischer Drop-in anchor EA II (Mechanical fastener for use in concrete)
      Created on 09/30/2021
      DOP - Declaration of Performance
      pdf, DoP No. 0756-CPD-0332
      Declaration of Performance for fischer Drop-in anchor EA II
      Valid from 06/11/2013
      to 06/11/2028
      cd-blue-c6785f99-b6bsb