Art.-No. 48416

fischer hammerset anchor EA II M16 stainless steel R

Top Features
  • Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve.
  • Use of standard metric screws and threaded rods lowers complexity.
  • Power-saving series installation with machine setting tool EA II S-SDS.
  • ETA approval for non-cracked concrete.
  • Made of stainless steel for fixings used outside.

The advantages / Product description

The internally threaded anchor made of stainless steel with a rim for simple Hammerset installation.
Advantages
  • The embossed edge prevents the anchor sleeve from slipping, thus allowing trouble-free hammerset installation.
  • The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use.
  • The machine setting tool EMS allows for effortless installation, particularly in the case of series installations.
  • The embossing that is applied when expanding with the Setting tool EHS Plus offers a simple control of the anchoring and provides increased safety.
  • Fixing point on hef 25 mm against inadvertent of the anchor before expansion.
  • Ideal for applications with high load requirements.
The fischer Hammerset anchor EA II R is an internal threaded anchor made of stainless steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II R is ideal for fixing steel constructions and formwork props in external areas with approval.
Youtube VideoYoutube VideoYoutube Video

Application and approval

Applications
  • Sprinkler systems
  • Steel constructions
  • Machines
  • Consoles
  • Shuttering props
Building materials
Approved for:
  • Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
  • Concrete C20/25 to C50/60, non-cracked
Also suitable for:
  • Concrete C12/15
  • Natural stone with dense structure
You can find detailed information on building materials in the registration document.
Approvals
  • ETA-07/0135
  • ETA-07/0142
  • DoP No. 0756-CPD-0332
  • DoP No. 0292
  • DoP No. 0291
  • 3023222

Assembly instruction

Functionality
  • The EA II is suitable for pre-positioned installation.
  • Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer.
  • The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall.
  • The setting tools must sit on the rim of the anchor to ensure correct expansion.
Mounting Strip 1 Picture
1 / 7

Technical data

ETA-approval
Drill diameter (
d0
)
20 mm
Min. bolt penetration (
lE,min
)
16 mm
Max. bolt penetration (
lE,max
)
28 mm
Packaging Folding box
Amount 20 pcs.
GTIN (EAN-Code) 4006209484166

Documents for download

European Technical Assessment for fischer drop-in anchor EA II - Mechanical fasteners for use in concrete
Created on 10/20/2021
Declaration of Performance for fischer Drop-in anchor EA II (Mechanical fastener for use in concrete)
Created on 10/27/2021
European Technical Assessment for fischer drop-in anchor EA II - Fasterners for use in concrete for redundant non-structural systems
Created on 09/24/2021
Declaration of Performance for fischer Drop-in anchor EA II (Mechanical fastener for use in concrete)
Created on 09/30/2021
DOP - Declaration of Performance
pdf, DoP No. 0756-CPD-0332
Declaration of Performance for fischer Drop-in anchor EA II
Valid from 06/11/2013
to 06/11/2028
Factory Mutual
pdf, 3023222
FM Approval - Certificate of Compliance
Hammerset anchor EA II - Permissible loads of a single anchor in normal concrete of strength class C20/25.
Hammerset anchor EA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.
Hammerset anchor EA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in pre-stressed hollow core slabs of concrete C30/37 up to C50/60.
cd-green-58bb58464c-mbzdk